DESIGN

Test 1

DJJ2062

1)What does WCS stand for?

a)      Western CAD System

b)      World Coordinate System

c)       Worldwide Coordinate Sectors

2)From which direction does AutoCAD start measuring angles

a)      6 o'clock

b)      3 o'clock

c)       9 o'clock

3)When drawing in 2D, what axis do you NOT work with?

a)      Z

b)      X

c)       Y

4)Is 300 degrees the same as -60 degrees in a drawing?

a)      No

b)      It depends upon your drawing

c)       Yes

5)Which of the following is NOT a way to enter coordinates in AutoCAD?

a)      Polar

b)      Approximate

c)       Relative

6)Which one of these will NOT start the Print command

a)      ALT+P

b)      PLOT

c)       PRINT

7)What should you pay close attention to when learning AutoCAD?

a)      The Toolbar

b)      Tool Icons

c)       The Command Line

8)Polar coordinates are used mostly for drawing...?

a)      Angled Lines

b)      Curved Lines

c)       Vertical Lines

9)Which keystrokes will UNDO a command

a)      ALT+U

b)      CTRL+U

c)       CRTL+Z

10)When using the TRIM command, which do you select first?

a)      Everything

b)      The cutting edges

c)       The object to be trimmed

11)How many snap points does an object have?

a)      Depends upon the object

b)      1

c)       3 or more

12How many points do you need to define for the rectangle command?

a)      1

b)      2

c)       4

13)How many AutoCAD objects are in a rectangle?

a)      1

b)      4

c)       2

13)If you draw a line at 270 degrees it will point ___

a)      Down

b)      Up

c)       Left

14)How long is a line from 1,4 to 4,4?

a)      4 units

b)      Can't easily tell from those coordinates

c)       3 units

15)How long is a line drawn from 1,4 to @4<5 o:p="">

a)      3 units

b)      3.5467 units

c)       4 units

16)How many points do you need to draw a line using Absolute Coordinates

a)      2

b)      1

c)       It depends upon the line

17)When selecting objects, pressing 'L' will:

a)      Select the last object created

b)      Select lines only

c)       Select the last object you modified

18)Pressing Shift while you are selecting will:

a)      Allow you to draw a window

b)      Remove the next selected object from the set

c)       Automatically delete the object(s)

19)Pressing F when selecting objects will...

a)      Finish the selection set

b)      Allow you to find specific text

c)       Allow you to draw a fence

20)How do you select the last set of object(s) you selected

a)      Type P

b)      Type H to highlight them

c)       Type L

21) How do you select objects with a Crossing Selection?

a)      Draw a window from right to left

b)      Draw a window from left to right

c)       Draw a window from up to down

22)What is the best way of drawing a rectangle?

a)      Using the Rectangle command

b)      Using the Line command

c)       Using the Polyline command

23)To move something four units to the right, what would be the 2nd point of displacement?

a)      4,0

b)      @4.0

c)       @4,0

24)How should you select objects when using the stretch command?.

a)      Pick them one by one

b)      Hold the shift key while selecting

c)       With a crossing selection

25)The origin of a drawing is at:

a)      The first point you select

b)      A random point in space

c)       0,0

26)Objects are rotated around the ____

a)      Centre of the object

b)      Base point

c)       Bottom right of the object

27)The fillet command creates ____

a)      Both Round and Sharp Corners

b)      Round Corners

c)       Angled Corners

28)A polar array creates new objects ____

a)      In a grid pattern

b)      In a circular pattern

c)       In a straight line

29)The distances set for a chamfer are ____

a)      Always the same

b)      Sometimes different

c)       Always different

30) You should use Osnaps when you dimension ____

a)      Only on large drawings

b)      Always

c)       Never

31)How many layers should a drawing have?

a)      1 or 2

b)      As many as are needed

c)       4

31)When can you set the height of your text?

a)      Only when you start the drawing

b)      Only in a special text dialog box

c)       When you are starting the Text command

32)Scaling objects makes them ____

a)      Smaller

b)      Either Bigger and Smaller

c)       Bigger

33)DDE can be used in which direction?

a)      All

b)      45 degree increments

c)       90 degree increments

34)When using Object Snap Tracking, you should turn on ____

a)      Osnaps (F3)

b)      Object Snap Tracking (F11)

c)       Both Osnap and Otrack

35)When setting up Polar Tracking, the Increment Angle ____

a)      Doesn't really do anything

b)      Sets multiplies of the selected angle

c)       Locks you into one angle

36)Object tracking works only with ____

a)      Endpoints only

b)      Midpoints only

c)       Any active Osnap

37)How can you change an object's properties?

a)      Right Click and choose Quick Properties

b)      Right click and choose Properties

c)       All

38)Double clicking on a text object allows you to change its layer

a)      No

b)      Yes

c)       Only if it is on the TEXT layer

39)If you select a line and a rectangle and view the properties ____

a)      You will see only limited properties

b)      You will see all the properties

c)       You will see the properties of the first selected object

40)When you want to close the Properties palette ____

a)      Type CLOSE

b)      Move it off the screen

c)       Click the X in the top left of the palette

41)To invoke the Zoom command transparently, type ____

a)      :Z

b)      'Z

c)       @Z

42)Panning allows you to ____

a)      Close in on a small area

b)      Move around the drawing at the same scale

c)       See all of the drawing at once

43)Why should you use the Zoom tools?

a)      All

b)      To be more accurate

c)       To be faster

44)Which is not a valid Zoom option?

a)      All

b)      Next

c)       Previous